EOC2611P is a long range outdoor wireless client bridge / access point that operates seamlessly in the 2.4GHz frequency spectrum and provides high bandwidth up to 108Mbps with SuperG. EOC2611P features high transmit power and high receive sensitivity, which extend wireless range and coverage to reduce roaming between access points and to get a more stable wireless connection. It also reduces the total costs of hardware ownership. With the new dual polarity antenna, users can utilize multi-polarization for best performance.

EOC2611P supports distance control by 1km to 30km and RSSI indicator, which enable the best transmit and receive signals for wireless communication. It also comes with PoE injector (24V) to make outdoor deployment fast and easy.

To protect your wireless connection, EOC2611P can encrypt all wireless data by 64/128/152-bit WEP encryption or WPA2/WPA. MAC address filter allows user to select exactly which stations should have the access to your wireless network. In addition, user isolation function can protect the private network between client users.

The attractive design, superior performance, and array of features make the EOC2611P an ideal wireless solution for any residences or offices.

• HARDWARE SPECIFICATIONS:
• MCU/RF: Atheros AR2313 + AR5112
• Memory: 32MB SDRAM
• Flash: 8MB
• Physical Interface:
• One 10/100 Fast Ethernet RJ-45
• Reset Button
• Antenna Switch (Internal & External)
• RP-SMA Connector x2 (2.4GHz & 5GHz)
• LED Indicators:
• Power (Status)
• LAN (10/100Mbps)
• WLAN (Wireless Activity)
• Link Quality x3 (Client Bridge mode)
• Green: Excellent Quality / Yellow: Good Quality / Red: Poor Quality
• Power Requirements:
• Active Ethernet: (Power-over-Ethernet) Proprietary PoE Design
• Power Adapter: 24V/1A DC
• Regulation Certifications: FCC Part 15C/15B/15E, EN301 893, EN 300 328, EN 301 489-1/-17, EN60950, IC
• RF SPECIFICATIONS:
• Frequency Band:
• 802.11a: 5.150~5.350GHz, 5.470~5.725GHz, 5.725~5.825GHz
• 802.11b/g: 2.412~2.472GHz
• Modulation Technology: OFDM : BPSK, QPSK, 16-QAM, 64-QAM, DSSS: DBPSK, DQPSK, CCK
• Operation Channels:
• 802.11a: 21 for North America
• 802.11b/g: 11 for North America, 14 for Japan, 13 for Europe
• Receive Sensitivity (Typical):
• IEEE 802.11a
• -92dBm @ 6Mbps
• -73dBm @ 54Mbps
• IEEE 802.11g
• -92dBm @ 6Mbps
• -75dBm @ 54Mbp
• IEEE 802.11b
• -97dBm @ 1Mbps
• -91dBm @ 11Mbps
• Available Transmit Power (Average):
• IEEE 802.11a
• 26dBm @ 6~24Mbps
• 24dBm @ 36Mbps
• 22dBm @ 48Mbps
• 20dBm @ 54Mbps
• IEEE 802.11g
• 26dBm @ 6~24Mbps
• 24dBm @ 36Mbps
• 23dBm @ 48Mbps
• 22dBm @ 54Mbps
• IEEE 802.11b
• 27dBm @ 1~11Mbps
• Antenna:
• Internal: Directional Panel Antenna; Peak Gain 14dBi
• Horizontal -3dB Bandwidth: 35°
• Vertical -3dB Bandwidth: 15°
• Antenna Polarity: Dual-Polarized; Vertical/Horizontal
• Polarity Selection: Software Controlled
• External: RP-SMA Female Type x2 (2.4GHz & 5GHz)
• SOFTWARE FEATURES:
• Topology: Infrastructure
• Protocol / Standard: 802.3 (Ethernet) / 802.3u (Fast Ethernet) / 802.11a (5GHz WLAN) / 802.11b/g (2.4GHz WLAN)
• Operation Mode: Access Point / Client Bridge / Client Router / WDS
• LAN: DHCP Server / DHCP Client
• VPN: VPN pass-through
• Wireless:
• Channel Selection (Setting varies by countries)
• Transmission Rate: 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 in Mbps
• Long Distance Transmission: 1km to 30km (ACK Timeout)
• Auto Channel Selection
• Traffic Shaping
• Transmit Power Table
• AP Detection
• Narrow Bandwidth 5/10/20MHz Support
• Signal Strength LED Indicators (3 colors)
• PPPoE & PPtP (Client Router mode)
• Preferred SSID
• Mutiple SSID Support (up to 4)(Access Point mode)
• 802.1q VLAN Tagging Support
• Security:
• WEP Encryption 64/128/152bits
• WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
• WPA/WPA2 Enterprise (WPA-EAP using TKIP)
• 802.1x Authenticator
• Layer 2 Isolation
• Hide SSID in Beacons
• MAC Address Filtering (up to 50)
• Wireless STA (Client) Connected List
• QoS: WMM
• MANAGEMENT:
• Configuration: Web-Based Configuration (HTTP)
• Firmware Upgrade: Upgrade Firmware via Web Browser / Keep Latest Setting When Firmware Update
• Administrator Setting: Administrator Password Change
• Reset Setting: Reboot (Press 1 second) / Reset to Factory Default (Press 5 seconds)
• System Monitoring: Status, Event Log
• SNMP: v1, v2c
• MIB: MIB I, MIB II (RFC1213)
• Backup & Restore: Settings Through Web
• Time Setting: NTP (Auto Setting) / Manual Change
• ENVIRONMENT & PHYSICAL:
• Temperature Range: Operation -20°C to 70°C (-4°F to 158°F) / Storage -30°C to 80°C (-22°F to 176°F)
• Humidity (Non-condensing): 0% ~ 95% Typical
• Dimensions: L: 10.24” (260mm) x W: 3.31” (84mm) x H: 2.17” (55mm)
• Weight: 0.66lb. (300g)